超微工作主板X8DA3intel5520

产品详情

• SAS Xeon Quad/Dual-Core 5520 Chipset w/ 2 (x16) PCI-E 2.0 & IEEE 1394a Workstation

Key Features

1. Dual Intel® 5500 series Xeon® Quad/
Dual-Core, with QPI up to 6.4 GT/s

2. Intel® 5520 (Tylersburg) Chipset

3. Up to 96GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 24GB
Unbuffered DIMM

4. Intel® 82573V/L Dual-port Gigabit
Ethernet Controller

5. LSI 1068E 8-Port SAS Controller;
RAID 0, 1, 10; RAID 5 optional

6. 6x SATA2 (3 Gbps) Ports via
ICH10R Controller

7. 2 (x16) PCI-E 2.0,
1 (x4) PCI-E (in x 8 slot),
3x PCI 33MHz slots

8. Realtek ALC883 7.1 HD Audio

9. 2x IEEE 1394a Headers

10. IPMI 2.0 (SIMLC) Slot

Links & Resources

	Tested Memory List

	Motherboard Manual

	Update Your BIOS

	Download the Latest Drivers and Utilities


Processor/Cache

CPU	Dual 1366-pin LGA Sockets Supports up to twoIntel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor)
QPI	up to 6.4 GT/s


System Memory

Memory Capacity	12x 240-pin DIMM sockets Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory Memory Mirroring supported
Memory Type	1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB, 8GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D
SAS	LSI SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support
SATA	Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMLC) (Optional: AOC-SIMLC)
Network Controllers	Intel® 82573V & 82573L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio	Realtek ALC883 7.1 HD audio
Super I/O	Winbond 83627HF chip


Input / Output

SAS	8 SAS / SATA ports
Serial ATA	Six Serial ATA ports Six SATA hard drives supported
Floppy	1 Floppy controller; 1.44 MB
LAN	2x RJ45 LAN ports
USB	4x USB rear ports 2x USB on-board 4x USB internal headers Total 10 USB 2.0 Compliant
Audio	Realtek ALC883 7.1 HD audio
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port	2 Fast UART 16550 serial ports


Chassis ( Optimized for X8DA3 )

2U Chassis	CSE-213A-R900LP CSE-216A-R900LP CSE-216E1-R900LP CSE-216E2-R900LP CSE-823MTQ-R700LP CSE-825MTQ-R700LPB CSE-825TQ-560LPV CSE-825TQ-R700LPV CSE-826TQ-R800LPV
3U Chassis	CSE-833T-550 CSE-833T-650 CSE-833T-R760 CSE-835TQ-R800B CSE-836E1-R800V CSE-836E2-R800V CSE-836TQ-R800V CSE-933E1-R760 CSE-933E2-R760 CSE-933T-R760 CSE-936A-R900B
Tower / 4U Rackmount	CSE-743i-645 CSE-743i-650 CSE-743i-R760 CSE-743T-645 CSE-743T-650 CSE-743T-R760 CSE-743TQ-865-SQ CSE-743TQ-865B CSE-743TQ-R760 CSE-745TQ-800 CSE-745TQ-R800 CSE-846E1-R900B
Important Chassis Notes	To ensure system stability, a 550W (minimum) ATX power supply [Two 8-pin (+12V) and 24-pin are required]


System BIOS

BIOS Type	32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support


Management

Software	Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5 SuperDoctor III
Power Configurations	ACPI / ACPM Power Management


PC Health Monitoring

CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator
FAN	Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only)
Temperature	Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI
Other Features	Chassis intrusion detection Chassis intrusion header


Operating Environment / Compliance

RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)