超微5000X芯片组工作主板X7DAL-E+

产品详情

Key Features

1. Quad & Dual Core Intel® 64-bit Xeon®
Support, 667 / 1066 / 1333MHz FSB

2. Intel® 5000X (Greencreek) Chipset

3. Up to 24GB 667/533MHz DDR2 ECC
FB-DIMM (Fully Buffered DIMM)

4. Intel® (ESB2/Gilgal) 82563 Dual-port
Gigabit Ethernet Controller

5. 6x 3Gb/s SATA Ports via ESB2
Controller

6. 1 (x16) & 1 (x4 in x16) PCI-Express,
    2x 64-bit 133/100MHz PCI-X,
    2x 32-bit PCI 33MHz
    1x UIO Slot

Links & Resources

	Tested Memory List

	Motherboard Manual

	Update Your BIOS

	Download the Latest Drivers and Utilities

	SAS Cable Compatibility


Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to twoIntel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor)up to 3.40 GHz
System Bus	1333 / 1066 / 667 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems


System Memory

Memory Capacity	Six 240-pin DIMM sockets Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported
Memory Type	667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	256MB, 512MB, 1GB, 2GB, 4GB
Memory Voltage	1.8V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5000X (GreenCreek) chipset MCH + ESB2
SATA	Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux)
Network Controllers	Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OATsupport for fast, scaleable, and reliable networking
Super I/O	Winbond 83627HF chip
Clock Generator	ICS932S401EGLF


Input / Output

Serial ATA	Six Serial ATA ports Six SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB
LAN	2x RJ45 LAN ports
USB	4x USB rear ports 2x USB internal headers (for 4 ports) 8 total USB ports, 2.0 Compliant / 1.1 Compliant
Audio	Line-in / Line-out / Microphone Ports 7.1 High Definition audio
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header
Parallel Port	Parallel Port Header


Chassis ( Optimized for X7DAL-E+ )

Mid Tower	CSE-733TQ-645 CSE-733i-645
Tower / 4U Rackmount	CSE-743TQ-865 CSE-743T-645 (FAN-0091, CBL-0088 Required) CSE-743i-645 (FAN-0091, CBL-0088 Required)
Important Chassis Notes	To ensure system stability, a 560W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features	Plug and Play (PnP) SMBIOS 2.3 DMI 2.3 PCI 2.2 ACPI 1.0 PCI-X 1.0 USB Keyboard support Hardware BIOS Virus protection


Management

Software	SuperDoctor III Watch Dog NMI
Power Configurations	ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal/External modem remote ring-on STR (Suspend-to-RAM)


PC Health Monitoring

CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby & +5V Standby, VBAT CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of six 4-pin fans 6x fans with status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis, environment CPU thermal trip support Thermal Control for 6x Fan Connectors I²C temperature sensing logic Thermal Monitor 2 (TM2) support
LED	CPU / System Overheat LED Suspend-state Indicator LED +5V Standby Alert LED
Other Features	Chassis intrusion detection Chassis intrusion header SDDC Support


Operating Environment / Compliance
RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)