四川霍尼韦尔T6861V2WB数字温控器

产品资料：

• Install the Connectors and cables where they will not be stepped

on to prevent the wires inside the cables from being broken and to

prevent the Connectors from being damaged. If the Connectors or

cables must be installed where they might be stepped on, protect

them with covers.

• Refer to the specifications for your cables before bending the

cables and do not bend them past their minimum bending radius.

• If sensors or switches are not attached during installation, protect

the mating surface of the Connector with a XS2Z-22 Waterproof

Cover of XS2Z-14/15 Dust Cover.

Simple Wiring of Sensor Actuators

• Greatly reduce wiring in combination with the Smartclick

XS5.

• the connector and turn 1/8 of a turn to lock the

connectors.

• Higher rated current to enable output applications.

• Use previous M12 screw connectors.

Specifications Materials and Finish

Connection Combinations

Rated current 4 A/port, 12 A/Box (power line)

Rated voltage 10 to 30 VDC

Contact resistance

(connector)

40 mΩ max.

(20 mV max., 100 mA max.)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength

(connector)

500 VAC for 1 min

(leakage current: 1 mA max.)

Degree of protection IP67 (IEC60529)

ion tolerance 50 times min.

Lock strength Pulling: 100 N/15 s, Twisting: 1 N·m/15 s

Cable holding strength 100 N/15 s

Lock operating force 0.1 N·m to 0.25 N·m

Ambient temperature

range Operating: −25 to 70°C

Item Materials/finish

Contacts Brass/nickel base, 0.4-μm gold-plating

Fixtures Nickel-plated zinc alloy

Case PBT resin (UL94V-O), light gray

Bushing Rubber

O-ring Rubber

PCB Glass epoxy board