全自动制罐设备--4L全自动小方罐小圆桶生产线

一、工序

立罐输送→寻缝焊→胀方成型→压印成型→面翻边→调头→底翻边→底分盖/底预封罐→底封罐→调头→面分盖/面预封罐→面封罐

二、主要技术参数

1、封罐高度：280-360mm
2、大对角线长度：185mm

3、适应马口铁厚度：0.18-0.30mm

4、电机功率：15kw

5、电源：380v（3相5线）

6、气压：0.4-0.7 mpa

7、外形尺寸：18000 x1500 x1500（输送带长度可调）

8、整机重：12t

9、生产效率：22-25个/min

三、势：

1、用两个机头封罐；
2、首道和尾道分开，首道四轮预封罐，尾道两轮压紧，
3、不用离合器，加长机头寿命，减少率。

One, working procedure
Vertical tank - seeking seam - expansion side molding --- ---- --- embossing molding surface flanging tune - bottom flange ---- bottom cover bottom sealing - pre / bottom sealing - tune -- surface / surface cover sealing surface pre - sealing tank
In two, the main technical parameters
1, sealing height: 330-400mm
In 2, the maximum length of the diagonal: 315mm
In 3, motor power: 40kW
4, air pressure: 0.5-0.7mpa
5, size: 25000 x1600 x2700mm
In 6, the whole weight: 25t
In 7, the production efficiency: 20-22 / min
In three, the main character
1, expanding party imprint is driven by a servo motor, clearance operation, environmental protection and energy saving;
2, using dual head 12 round sealing, applicable to all kinds of material tin;
In 3, does not need a clutch of frequent operation, reduces the repair rate.