压缩介 | 空气 | 工作原理 | 活塞式压机 |
润滑方式 | 润滑油 | 爱安达 |
· Ready to connect, fullywired with pneumatic/electric compressor control and start/delta start cycle,
· Automatic stop
· Automatic condensation drain
· Operating panel withstart/stop buttons, emergency off switch and drain test button, pressure gaugeand hours counter
· Sound insulated housing with sturdy steel frame,powder coated in RAL 6026
· Noise: 62dB(A) @ 1 m distance
· All pistons with piston rings
· Low pressure oil pump
· 2nd Ventilator (see catalogue)
· Oil/water separators after each stage,
· Safety valve for each stage
· Breathing air purification in accordance with EN12021,
· Pressure maintaining and non-return valve
· 2 self venting filling valves with filling hoses andconnections, and/or HP outlet
Technical Data:
Type: | 3 cylinder, 3 stage, air cooled, oil lubricated compressor |
Delivery rate: | 280 Liter/min. (16.8 m3/hr), 10 cfm |
Prime mover: | 7.5 kW Electric-Motor 400V / 3 Phase / 50 Hertz |
Operating temperature: | +5°C - +50°C |
Operating pressure: | Max. 350 bar (please state required working pressure) |
Cooling air requirement: | 2,250 m3/hr. |
Air outlet temperature: | ca. 8-10 °C above ambient |
Breathing air filter capacity: | 900 m3 at 20°C (approx. 55 hrs.) |
Compressor speed: | 1300 RPM |
Oil capacity and pressure: | 1.8 Liter, 1.8 bar (+/- 0.3 bar) |
Dimensions: | D x W x H (mm) 1030 x 760 x 1630 |
Weight: | 240 kg |
Noise level: | 62 dB(A) 1m distance |
德国爱安达LW高压活塞式压缩机原装进口,两室一,充气泵,高压呼吸压缩机,高压气密性检测,高压氮气压缩机。