松下 | 型号 | 2M210-M1 | |
应用范围 | 微波 | 功率特性 | 大功率 |
频率特性 | 超高频 | 极性 | NPN型 |
结构 | 平面型 | 材料 | 铁 |
封装形式 | 金属 | 封装材料 | 金属封装 |
营销方式 | 现货 | 产品性 | 热销 |
*Filament Current | 4.1.1 | tk=120s | If | 10 | 8 | 12 | A |
Peak Anode Voltage | 4.3.1 | (6) | ebm | 4.10 | 3.90 | 4.30 | kV |
Average Output Power (1) | (6) | Po(1) | 900 | 860 | - | W | |
Frequency | 4.3.4 | - | f | 2460 | 2450 | 2470 | MHz |
Note
(1) The tube shall be mounted on the output coupler (shown in the attached drawing) or similar one. Ambient temperature is 25℃and cooled by forced 1000L/min.
Single phase full wave rectifier without filter shall be used for power supply.
(2) The point for measuring anode/Tp and filter case/Tc temperature are shown in the outline drawing.
(3) In an abnormal condition (without load in the cavity), the maximum allowable anode temperature is 300℃, provided that the operation time does not exceed 30 minutes per operation and the dwell time at the anode temperature 240~300℃does not exceed 25 hour in total.
(4) The maximum temperature of feed through capacitor should be 120℃. (5) Antenna temperature/Ta is measured by thermopaint.