anderol3057M工业润滑油

ANDEROL ?3057MSYNTHETIC COMPRESSOR OIL, 46/68For more information please refer to the relevantMaterial Safety Data Sheet accompanying eachproduct.?ANDEROL is a reg. trademark of ANDEROL information is furnished without warranty, representation, inducement,or license of any kind, except that it is accurate to the best of OURknowledge or obtained from sources believed by ANDEROL to beaccurate. ANDEROL does not assume any legal responsibility for use ofreliance upon it. Only chemists or chemically qualified lab techniciansshould carry out tests. Before using any chemical, read its label andMaterial Safety Data Sheet. GENERAL INFORMATIONANDEROL 3057M is a PAO-based compressor lubricant that was designed to provide long-term lubrication of bothrotary-vane and oil-flooded screw compressors. TYPICAL PROPERTIES:PROPERTY TEST METHOD TYPICALRESULTS Viscosity GradeViscosity @ 40°C, cStViscosity @ 100°C, cStViscosity @ -25°C, cStViscosity IndexDensity @ 15°C, kg/lPour Point, °CFlash Point, COC, °CTotal Acid Number, mg KOH/gHumidity, %Evaporation, 22 hrs @ 210 °F, %Demulsibility @ 54 °C, ml oil/water/emulsion (min)Copper Strip Corrosion 8 hrs @ 100 °CFour-Ball Wear, 1200 rpm, 75 °C, 40 kg, 1 hr, mmFoaming Tendency, Sequence I, II, IIISpecific Gravity @15.6°CASTM D-2422ASTM - 44STM - 44STM D-44STM D-2270DIN 51.757ASTM D-97ASTM D-92ASTM D-664ASTM D-1744ASTM D-972ASTM D-1401ASTM D-130ASTM D-4172ASTM D-892ASTM D -129846/6855.38.1336721160.864-662600.050.02<140/38/2 (15)1a0.6Nil0.8 5 ANDEROL 3057MAPPLICATIONS???Recommended for use in compressors such as:???Oil flooded rotary screw compressors???Oil flooded rotary vane compressors???Reciprocating compressorsNominal operating range for Anderol 3057M is -40°F to 400°F (-40°C to 205°C). APPROVALSTested and approved by Knorr-Bremse AG (Knorr Brake Corporation). Should you have any questions regarding the suitability ofANDEROL 3057M compressor lubricant for a specific manufacturers model compressor, please check with your ANDEROLlubricant supplier or contact Anderol Company. ADVANTAGES???Fewer oil changes for reduced maintenance???Compatible with compressor seals, gaskets, hoses, and air system components???Resistance to oxidation with reduced compressor varnish and deits???Greatly reduces fire and explosion hazard???Longer service life and greater protection of compressor components???Lower oil consumption COMPATIBILITYANDEROL synthetic hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets andhoses. No special precautions related to compatibility are required whenanderol 3057M工润滑油